Cim-Tek Filter 70345 - 150 LPM

Product Ref: CT70345

Lead time approx. 2 - 3 working days

Home Delivery

United Kingdom mainland delivery from £9.95 ex VAT

Parcel Delivery (Highlands & Islands are charged a higher fee than standard)

check delivery cost

updown
£60.00 ex VAT
(£72.00 inc VAT)

Cim-Tek Filter 70345 - 150 LPM Downloadable Documents

Cim-Tek Filter 70345 - 150 LPM Description

Cim-Tek Fuel Bowser Filter Element 70345 - Removes particles only, 150 litres per minute gravity or pump flow

This Cim-Tek filter removes particles only to 14 micron, is a large diameter and longer in length, high capacity and high speed as copes with up to 150 litres per minute.

The element has MICROGLASS media inside used to trap the dirt particles, 

  • 14 micron Cim Tek filter
  • Maximum flow rate of 150 litres Per Min
  • Suitable for diesel
  • Cim-Tek part code: 700345
  • Includes 1 x filter element

Please note: No BSP adaptor to fit this element just a spare element, these elements fit the existing head/adaptor that are already fitted to the bowser tank/pump system

Cim-Tek Filter 70345 - 150 LPM Specification

  • Product Code: HY
  • Suitable For Fuel: Diesel, Gas Oil

Cim-Tek Filter 70345 - 150 LPM Customer Reviews

By on
"Does what it says."
Star Rating 5

Cim-Tek Filter 70345 - 150 LPM Delivery Information

Tanks:

The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page.  Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.

 

Tanks Over 2500L – Articulated Lorry – Customer Offload:

These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift.  Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.

 

18 Tonne Tail Lift HGV

This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery.  If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.

 

HIAB Delivery

HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.

 

Accessories:

Most accessories will be delivered within 1-3 working days. If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.

 

 

Cim-Tek Filter 70345 - 150 LPM Returns Information

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Fuel Tank Shop return policy now.

People who bought this also bought...