Adblue Tanks

To safely fill an IBC first make sure that the pallet, cage and bottle and valve are suitable for use with the intended product. Ensure that the valve is securely tighten to the inner bottle and that the valve is closed and that the drip cap is secured and tightened. Check that the inside of the bottle is clean. When hot  filling product  do not  exceed 65°C. When bottom  filling make sure that  the vents are functioning correctly or open the top cap.  Do not over fill the IBC.  After filling, if the product has a UN number, ensure that the lid seal is correctly  positioned and tighten the screw cap to 70-80 Newton/Meters.

Do not lift IBCs from the top frame. Ensure that the fork truck tines are fully inserted under the IBC before lifting. Ensure that the vehicle floor is in good condition and free of all nails etc. that could puncture the IBC. Always transport IBCs with the correct labelling attached to the ID Plate.

Always secure IBCs to prevent possible movement during transit.

Yes, depending on the pallet type, our IBCs can be stacked as follows whether empty or full:

MX IBCs - with metal or plastic pallets - Up to 4 High (with a maximum SG of 1.6)

SX IBCs - with metal pallets - Up to 4 High (with a maximum SG of 1.6)

LX IBCs - with wooden or plastic pallets - Up to 3 High (with a maximum SG of 1.4)