Ultra Compact Tank Isolation Filter Assembly Kit - Double Take Off

Product Ref: ARM700

Lead time approx. 2 - 3 working days

Home Delivery

United Kingdom mainland delivery from £9.95 ex VAT

Parcel Delivery (Highlands & Islands are charged a higher fee than standard)

check delivery cost

Ultra Compact Tank Isolation Filter Assembly Kit - Double Take Off Description

Ultra Compact Tank Isolation Filter Assembly Kit - Double Take Off

The Ultra Compact Tank Isolation Filter Assembly Kit - Double Take Off is designed for bottom outlet domestic heating oil tanks to remove debris with instant isolation and no pollution risk. The kit consists of the Ultra Compact isolation valve, 40µ cleanable alloy bowl filter and all the fittings required for installation. 

On other oil tank filter assemblies, an isolation valve is not the first component screwed into the tank, which means that if the filter valve needs replacing then the tank needs to be drained. By having the Ultra Compact valve installed first, this filter assembly kit saves the engineer the couple of hours it would previously have taken to pump the tank out, replace the filter valve and then pump the heating oil back in. 

The Ultra Compact oil tank isolator valve is also available alone to replace the 1' BSPT x 1/2' BSPP adaptor supplied with generic filter assemblies. Both the filter kit and the valve alone can be retrofitted during service or at the time of the original tank installation. 

Features of the Ultra Compact Tank Isolation Filter Assembly Kit - Double Take Off:

  • 2 x 50 micron oil filter
  • 1" M BSPT isolation valve inlet
  • ½'' F BSP or 10mm compression outlet
  • PTFE tape

Ultra Compact Tank Isolation Filter Assembly Kit - Double Take Off Specification

  • Product Code: CT
  • Suitable For Fuel: Diesel, Gas Oil, Heating Oil

Ultra Compact Tank Isolation Filter Assembly Kit - Double Take Off Delivery Information

Tanks:

The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page.  Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.

 

Tanks Over 2500L – Articulated Lorry – Customer Offload:

These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift.  Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.

 

18 Tonne Tail Lift HGV

This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery.  If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.

 

HIAB Delivery

HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.

 

Accessories:

Most accessories will be delivered within 1-3 working days. If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.

 

 

Ultra Compact Tank Isolation Filter Assembly Kit - Double Take Off Returns Information

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Fuel Tank Shop return policy now.

People who bought this also bought...