JAB DUC 2 90L Direct Slim Unvented Cylinder
Product Ref: JD2090DSLIM

(allow 7 Working days for delivery)
Home Delivery
United Kingdom mainland delivery from FREE ex VAT
FREE Delivery to Mainland UK
JAB DUC 2 90L Direct Slim Unvented Cylinder Description
JAB DUC 2 90L Direct Slim Unvented Cylinder
The JAB DUC 2 90L Direct Slim Unvented Cylinder is a space-saving hot water storage solution designed for modern living. Compact in design yet generous in capacity, it's the perfect choice for homes and flats that need reliable mains-pressure hot water but have limited installation space.
With direct electric heating and robust construction, it delivers performance, efficiency, and convenience in a single, compact package.
Designed with installation in mind, allowing most existing airing cupboards to be used. The ideal choice for the replacement of standard copper cylinders.
Applications
- Suitable for small flats or 1-beroom homes with low demand
- Typical Use: 1-2 People, 1 Bathroom (shower or Bath)
- Apartments or flats where space is limited but mains-pressure hot water is needed
- Properties without a central heating system (all electric homes)
- Renovations and retrofits where a slim, efficient hot water cylinder is the best fit
Key Features & Benefits
- 90-Litre Capacity - Suited to small to medium homes with moderate hot water demand
- Slimline Design - Narrow profile makes it ideal for installation in tight spaces such as cupboards or utility areas.
- Direct Heating - Fitted with an immersion heater to heat the stored water directly, making it independent of a boiler
- Unvented System - Provides mains-pressure hot water for improved flow rates at taps and showers
- High-quality construction - Made from corrosion-resistant materials for durability and long service life.
- Efficient Insulation - factory-applied foam insulation reduces heat loss and energy use
- Safe and Reliable - Built-in safety controls, thermostatic regulation, and pressure relief for peace of mind
- Low maintenance - Simple design with minimal upkeep requirements
How it works
Being a direct cylinder, the JAB DUC 2 90L uses an immersion heater to heat the water stored inside. Connected to the mains supply, it delivers pressurised hot water directly to taps and showers without the need for a cold water tank. This makes it an excellent choice for properties without a central heating boiler or where additional hot water storage is required.
The unvented design means water is supplied at mains pressure, offering a more powerful flow compared to traditional vented cylinders.
Specifications
Product Code | JD2090DSLIM |
Nominal Capacity (L) | 90 |
Height (mm) | 900 |
Diameter Ø (mm) | 470 |
Reheat From Cold (mins) | 52 |
Reheat from 70% Draw-off (mins) | 27 |
ERP band | C |
Immersions Rating (kW) | 2 x 3 |
Standing Heat Loss (kWh/24hrs) | 1.37 |
All direct units are supplied with:
- 2 x 3kw 240v s/p Immersion Heaters
- 1- Expansion Vessel
- 1 x T & P Relief Valve
- 1 x 3 bar Inlet Chain
* Please note, the image is for visual purposes only and may be slightly different
JAB DUC 2 90L Direct Slim Unvented Cylinder Specification
- Product Code: HWS
- Guarantee: 25 Year Guarantee
JAB DUC 2 90L Direct Slim Unvented Cylinder Delivery Information
Tanks:
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks Over 2500L – Articulated Lorry – Customer Offload:
These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift. Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.
18 Tonne Tail Lift HGV
This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery. If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.
HIAB Delivery
HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.
Accessories:
Most accessories will be delivered within 1-3 working days (certain products and postcodes may take longer, please check the product page for update to date information). If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.
JAB DUC 2 90L Direct Slim Unvented Cylinder Returns Information
Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **
All Items must be returned unused, refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).
If you wish to return goods, please complete the form on this page to provide further information.
Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.
Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.
Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.