• display as grid Grid
  • display as list List

3500 Litre Bunded Oil Tank - Tuffa 3500VB3500 Litre Bunded Oil Tank - Tuffa 3500VB
from £2,745.00 ex VAT
(£3,294.00 inc VAT)
5000 Litre Bunded Oil Tank - Atlas 5000BVA5000 Litre Bunded Oil Tank - Atlas 5000BVA
Free Upgrade - Dongle
Gauge & Outlet Kit Included
5000 Litre Bunded Oil Tank - Atlas 5000BVA
Supplied complete with Watchman Advanced & Bottom Outlet Fitting Kit. Upgrade for free to a smart sensor with the Watchman Sensit Smart Wi-Fi Tank Level USB Receiver
£3,029.00 from £2,600.00 ex VAT
(£3,120.00 inc VAT)

5000 Litre Bunded Oil Tank - Deso V5000BT5000 Litre Bunded Oil Tank - Deso V5000BT
Price Match Available
Fast Delivery
5000 Litre Bunded Oil Tank - Deso V5000BT
V5000BT 5000 Litre Bunded Heating Oil Tank 5000 litres (approx. 1100 gallons) bunded kerosene storage tank. This quality bunded heating oil tank is suitable for domestic, agricultural, industrial and commercial fuel oil storage. Supplied complete with: Overfill Prevention Valve 4" Inspection Screw Lid 2" Vent 1" BSP Bottom Outlet (or Top Outlet Connection) Lockable...

5

£2,869.00 ex VAT
(£3,442.80 inc VAT)
5000 Litre Bunded Oil Tank - Titan ESV5000B5000 Litre Bunded Oil Tank - Titan ESV5000B
Price Match Available
5000 Litre Bunded Oil Tank - Titan ESV5000B
Supplied complete with Watchman Alarm, Watchman Sensit Smart Wi-Fi tank level USB receiver & Bottom Outlet Fitting Kit

5

£3,479.00 ex VAT
(£4,174.80 inc VAT)

5000 Litre Bunded Steel Oil Tank5000 Litre Bunded Steel Oil Tank
Gauge & Outlet Kit Included
Free Delivery Inc.
5000 Litre Bunded Steel Oil Tank
Supplied complete with Clock Type Contents Gauge & Bottom Outlet Fitting Kit
£3,950.00 ex VAT
(£4,740.00 inc VAT)
5400 Litre Bunded Oil Tank - Harlequin 5400ITE5400 Litre Bunded Oil Tank - Harlequin 5400ITE
Gauge & Outlet Kit Included
5400 Litre Bunded Oil Tank - Harlequin 5400ITE
Supplied complete with Apollo Standard & Bottom Outlet Fitting Kit (or Top Outlet)
from £3,380.00 ex VAT
(£4,056.00 inc VAT)

6000 Litre Bunded Oil Tank - Tuffa 6000VB6000 Litre Bunded Oil Tank - Tuffa 6000VB
from £3,099.00 ex VAT
(£3,718.80 inc VAT)
7500 Litre Bunded Oil Tank - Harlequin 7500ITE7500 Litre Bunded Oil Tank - Harlequin 7500ITE
Gauge & Outlet Kit Included
7500 Litre Bunded Oil Tank - Harlequin 7500ITE
Supplied complete with Apollo Standard & Bottom Outlet Fitting Kit (or Top Outlet)
from £4,505.00 ex VAT
(£5,406.00 inc VAT)

Fuel Tank Shop 10000L Bunded Steel Oil TankFuel Tank Shop 10000L Bunded Steel Oil Tank
10 Year Warranty (Square)
Gauge & Outlet Kit Included
Fuel Tank Shop 10000L Bunded Steel Oil Tank
Bottom Outlet Kit and Clock Gauge Included with Standard Option
from £9,436.25 ex VAT
(£11,323.50 inc VAT)
Fuel Tank Shop 4000L Bunded Steel Oil Tank
10 Year Warranty (Square)
Gauge & Outlet Kit Included
Fuel Tank Shop 4000L Bunded Steel Oil Tank
Bottom Outlet Kit and Clock Gauge Included
£4,213.75 ex VAT
(£5,056.50 inc VAT)

Fuel Tank Shop 4500L Bunded Steel Oil TankFuel Tank Shop 4500L Bunded Steel Oil Tank
10 Year Warranty (Square)
Gauge & Outlet Kit Included
Fuel Tank Shop 4500L Bunded Steel Oil Tank
Bottom Outlet Kit and Clock Gauge Included with Standard Option
from £4,071.25 ex VAT
(£4,885.50 inc VAT)
Fuel Tank Shop 5000L Bunded Steel Oil Tank
10 Year Warranty (Square)
Gauge & Outlet Kit Included
Fuel Tank Shop 5000L Bunded Steel Oil Tank
Bottom Outlet Kit and Clock Gauge Included
£4,407.50 ex VAT
(£5,289.00 inc VAT)

Fuel Tank Shop 5800L Bunded Steel Oil TankFuel Tank Shop 5800L Bunded Steel Oil Tank
10 Year Warranty (Square)
Gauge & Outlet Kit Included
Fuel Tank Shop 5800L Bunded Steel Oil Tank
Bottom Outlet Kit and Clock Gauge Included with Standard Option
from £5,531.25 ex VAT
(£6,637.50 inc VAT)
Fuel Tank Shop 7000L Bunded Steel Oil TankFuel Tank Shop 7000L Bunded Steel Oil Tank
10 Year Warranty (Square)
Gauge & Outlet Kit Included
Fuel Tank Shop 7000L Bunded Steel Oil Tank
Bottom Outlet Kit and Clock Gauge Included with Standard Option
from £6,758.75 ex VAT
(£8,110.50 inc VAT)

Fuel Tank Shop 7500L Bunded Steel Oil TankFuel Tank Shop 7500L Bunded Steel Oil Tank
10 Year Warranty (Square)
Gauge & Outlet Kit Included
Fuel Tank Shop 7500L Bunded Steel Oil Tank
Bottom Outlet Kit and Clock Gauge Included with Standard Option
from £7,651.25 ex VAT
(£9,181.50 inc VAT)
Tuffa 5000L Steel Bunded Heating Oil TankTuffa 5000L Steel Bunded Heating Oil Tank
New
Tuffa 5000L Steel Bunded Heating Oil Tank
5000L Bunded Steel Oil Tank The 5000L (1099 gallons) steel bunded heating oil tank is complete with an inner tank and bund for ultimate protection against leaks and spillages. Built with high quality 3 mm mild steel, this tank is ideal for domestic and non domestic purposes. This tank can also be adapted to include adding an additional 1.5" top suction. Weather resistant, offering...
£9,285.00 ex VAT
(£11,142.00 inc VAT)

5000 Litre Bunded FAQs

Can you screen an oil tank?

Although Oil tanks are not the most attractive things to have in your garden, we always recommend seeking the advice of your local OFTEC registered liquid fuel tank installer as to the best place to position and how to screen your tank, if needed. The regulations for oil tank installation vary according to which region of the UK or Ireland you live in and there are also other environmental factors that need to be taken into account.  For more information, please check out - OFTEC

Some ways customers have screened their tanks are below, however please check with your local OFTEC installer first.

Walls

One of the most common ways to hide an oil tank is to build a false wall around it. Whether you use bricks, stone or fencing, make sure you leave space to get in and around the tank for maintenance and replacement.

Landscaping

Probably the most effective and aesthetic ways to hide an oil tank is to surround it with shrubs, trees, or potted plants that can help to camouflage the tank from view. Make sure you the plants are properly maintained, as they can become a fire hazard if not cared for properly.

 

Whatever option you choose, your tank will be out of sight – but it should not remain out of mind! Remember to keep on top of oil levels and have your tank regularly inspected by a qualified engineer to prevent any potential problems.

 

Do I need a bunded tank, and how do I know?

All non-domestic oil storage tanks over 200 litres need to be bunded.

For domestic premises you need to carry out an oil storage risk assessment (this can be obtained from OFTEC - form TI/133D). In brief a Bund is required in domestic situations if...

    • You are storing over 2500 litres.
    • Your tank is near an open drain or loose fitting manhole.
    • Your tank is within 10m of controlled water such as a river, stream etc.
    • Your tank is located where any spillage could travel over hard ground to reach controlled water.
    • Your tank is located within 50m of a borehole, spring or well.
    • Your tank vent is not visible from the fill point. (Such as an extended fill point)
    • Your oil use is for a building other than a single family dwelling.
    • Any other unique hazards to your site 

What is a Single Skin Tank?

A Single Skin Oil Tank consists of a single container in which fuel is stored. Unlike Bunded Oil Tanks and Bunded Fuel Tanks, Single Skin Oil Tanks incorporate no secondary containment whatsoever and in the event of a spill, a pollution incident will occur.

Single Skin Oil Tanks are not suitable for the storage of fuel at commercial, industrial or institutional premises; or at domestic installations with an installed capacity of over 2,500 litres - unless installed within a suitably bunded area. For all other installations, an Oil Tank Risk Assessment must be undertaken by a competent person prior to installation and in accordance with the requirements of OFTEC Technical Instruction Book 3.

In anticipation of future possible regulations, serious consideration should be given to fitting a Bunded Tank, even where a single skin tank may currently suffice.

What is a Bunded Tank?

A Bunded Oil Tank is simply a tank within a tank. The fuel is stored in the inner tank and the outer tank acts as a failsafe so that in the event of a spillage, excess fuel will collect in the bund. They are a requirement at commercial, industrial and institutional premises.  In some circumstances in domestic situations it is still possible to use a single skin tank (see below).

 

How close to a boundary can I place an oil storage tank?

If the oil tank has a nominal capacity of less than 3,500 litres, it should not be placed any closer than 760mm to a boundary. This assumes that there are no flue outlets or buildings between the tank and the boundary. Where these distances cannot be achieved, the protection measures noted in OFTEC Technical Instruction Book 3 and British Standard BS5410 must be provided by means of a 30-minute fire resistant wall which extends a minimum of 300mm above and beyond the ends of the oil tank. For oil tanks with a nominal capacity of 3,500 litres or greater please contact your local Building Control Officer or OFTEC.

How close to a flue outlet can I place an oil tank?

Oil tanks with a nominal capacity of less than 3,500 litres should not be placed within 1.8 metres of a flue outlet. Where these distances cannot be achieved, the protection measures noted in OFTEC Technical Instruction Book 3 and British Standard BS5410 must be provided by means of a 30-minute fire resistant wall which extends a minimum of 300mm above and beyond the ends of the tank. For oil tanks with a nominal capacity of 3,500 litres or greater please contact your local Building Control Officer or OFTEC.

How close to a building can I place an oil tank?

Oil tanks with a nominal capacity not exceeding 3,500 litres should not be fitted any closer than 1.8 metres to a non fire-rated (30-minute minimum fire resistance) wall or eaves. Where these clearances cannot be achieved, the measures noted in British Standard BS5410 and OFTEC Technical Instruction Book 3 must be provided i.e. the provision of a 30 minutes (minimum) fire resistant wall which extends at least 300mm above and beyond the ends of the oil tank. It will be necessary to protect exposed eaves forming part of a roof within 1.8 metres of the top of an oil tank to provide a minimum of 30 minutes fire resistance. Cladding can be applied to the eaves in order to prevent fire from spreading to the roof. For oil tanks with a capacity of 3,500 litres or greater, please contact your local Building Control Officer or OFTEC.

Can I place an oil tank inside a domestic garage or building?

Internal oil storage tanks should never be installed in a habitable area and if installed internally, should always be contained within an enclosed chamber. Detailed requirements exist for internal oil storage installations. For more information contact your local Building Control Officer or OFTEC.

From what materials are plastic oil tanks manufactured?

All oil tanks supplied by Fuel Tank Shop are manufactured from Medium Density Polyethylene (MDPE) - a material that displays excellent chemical and impact resistance properties, making it ideal for external fuel storage. Fittings vary according to tank type and supplier. However, in general, fill points are made from either coated mild or stainless steel, outlets from coated mild steel, and vent points are manufactured from plastic. All materials used in the manufacture of oil tanks supplied by Fuel Tank Shop are resistant to the potentially damaging long-term effects of fuel.

What are the base requirements for plastic oil tanks?

All oil tanks must be installed on a flat, level and fire resistant base capable of supporting the weight of the tank when fully laden. If concrete slabs are used they should be a minimum of 50mm thick. The base should extend at least 300mm beyond the widest points of the tank and fully support the base of the tank in its entirety. Piers or pillars are not suitable for this purpose and can cause irreparable damage to the tank.

Are plastic oil tanks designed to protect from the damaging effects of sunlight?

Yes. Every tank sold by Tanks.ie is manufactured from a material which incorporated UV inhibitors. These prevent UV rays from permeating the structure of the tank, thus preventing fuel degradation.

Are plastic oil tanks suitable for the storage of fuel for aviation use?

No.

Are plastic oil tanks fitted with sludge-valves / ball-cocks?

No. Openings (other than the tank outlet) are not permitted below the maximum level of fuel in the tank. This reduces the risk of accidental spillage. In the event that contaminants (e.g. water) need to be removed from the tank, they should be removed by an appropriately licensed contractor via the inspection aperture fitted to each tank.

I have discovered the presence of water in my oil. How do I get this removed?

Here at Fuel Tank Shop we offer a range of water soakers which can help remove water from your oil tank, however if these do not suit then, please contact your local fuel distributor who will be able to provide advice on how best to remove it.

Are plastic oil tanks suitable for use with oil fired cookers?

Yes.

On warm days there is a slight smell of oil from my oil tank. Why?

This is perfectly normal and is simply the fuel venting through the weatherproof vent fitted to the oil tank.

Are plastic Oil Recycling Banks / Waste Oil Tanks suitable for the disposal of petrol or any other highly flammable liquid? 

No. For advice on how to dispose of petrol and any other similarly dangerous liquids, please contact your local authority.

Do you supply dip-sticks?

No - not as separate items. However, dipsticks are supplied as standard on all Harlequin tanks with a capacity between 650 litres and 2700 litres as standard.

Are Single Skin Oil Tanks or standard Bunded Tanks suitable for storing 'Adblue'?

No.