Dymac AceCube Professional 1750/140 Litre Dual Fluid Tank
Product Ref: ACP-DF-1750/140L
1750 litre diesel & 140 litre AdBlue steel bunded tank
Lead time approx. 2 - 3 working days
Home Delivery
United Kingdom mainland delivery from FREE ex VAT
FREE Delivery to Mainland UK, Customer Offload - Postcode Exclusions Apply
You may also need:
login to saveDymac AceCube Professional 1750/140 Litre Dual Fluid Tank Tank Compliance
Certified to transport when full of fuel
Certified to UL142, ULCS601 & UN31A/Y ADR
Dymac AceCube Professional 1750/140 Litre Dual Fluid Tank Downloadable Documents
AceCube Professional Dual Fluid Data SheetDymac AceCube Professional 1750/140 Litre Dual Fluid Tank Description
Dymac AceCube Professional 1750/140 Litre Dual Fluid Tank
The Dymac AceCube Professional Dual Fluid 1750/140 Litre is an IBC transportable fuel storage tank with a 110% bund and comes with a galvanized hatch lid and galvanized stacking corners
The innovative design allows the hatch lid to open up to conveniently positioned fitting ports
Complete with bi-directional fork-lift pockets
Fully transportable and UN & ADR compliant made from 4mm steel on the inner and outer tanks
110% integrally bunded
High grade paint finish
Designed for direct generator connections or with the optional 12v pump you can dispense fuel
AdBlue capacity 140 litres
Dimensions: Length 2300mm x Width 1325mm x Height 1295mm
Comes with 12v AdBlue 32lpm electric pump c/w 4m delivery hose, manual nozzle and crocodile clips, 1.5m suction hose and filter
Please choose option required for diesel pump if required:
12v 56lpm pump supplied with 1.5m x 1" suction hose c/w camlock device, mounting bracket, 2m cable c/w crocodile clips, water and particulate filter, 4m x 3/4" delivery hose and automatic nozzle with swivel
Standard Specification:
- Feed - 1.5" BSP pipe block with 1" port & metal stopper, 1" feed downpipe & 1.5" internal threaded coupling
- Feed - 1.5" BSP pipe block with 1/2" port & metal stopper, 1/2" feed downpipe & 1.5" internal threaded coupling
- Fill - 3" BSP external threaded pipe with 3" BSP fusible cap
- Level Gauge -1.5" BSP internal threaded coupling with level gauge
- P.Vent - 2" NPT internal threaded coupling with pressure vent
- E.Vent - 1/4" BSP internal threaded coupling with E Vent
- Spare - 1.5" BSP internal threaded coupling with 1.5" plug
- Fill Vent - 2" BSP external threaded pipe with 2" BSP cap
- Spare - 2" BSP internal threaded coupling with 2" plug
- UL Vent - 5" BSP internal threaded coupling with 5" plug
- Pump Antisiphon - 1/8" BSP internal threaded coupling with 1/8" plug
- 12v AdBlue 32lpm electric pump c/w 4m delivery hose, manual nozzle and crocodile clips, 1.5m suction hose and filter
- Dimensions (l x w x h) 2300mm x 1325mm x 1295mm
Dual Fluid 140 litre & 280 litre tanks come complete with:
- Feed - 1 x 3/4" BSP feed with threaded plug
- Vent - 1 x 1/4" BSP vent
- Return - 1 x 3/4" BSP return
- Suction - 1 x 2" BSP external threaded coupling with 3/4" suction line assembly
- Fill - 1 x 2" BSP fill with threaded plug
- Dipstick - 1 x 1/2" F BSP port with 1/2" dipstick
- Mounting Bracket - For future fitting of 12v AdBlue pump kit
Dymac AceCube Professional 1750/140 Litre Dual Fluid Tank Specification
- Product Code: DC
- Made From: Steel
- Suitable For Fuel: Diesel, Gas Oil, AdBlue
- Tank Type: Bunded, Transportable
- UN Certified / Approved for Transport under ADR: Yes
Dymac AceCube Professional 1750/140 Litre Dual Fluid Tank Delivery Information
Tanks:
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks Over 2500L – Articulated Lorry – Customer Offload:
These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift. Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.
18 Tonne Tail Lift HGV
This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery. If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.
HIAB Delivery
HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.
Accessories:
Most accessories will be delivered within 1-3 working days. If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.
Dymac AceCube Professional 1750/140 Litre Dual Fluid Tank Returns Information
Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **
All Items must be returned unused, refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).
If you wish to return goods, please complete the form on this page to provide further information.
Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.
Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.
Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.
View Related Categories
You may also like...
