CIM-TEK Tank Dryer - Check for water in your tank!

Product Ref: CTS1901

Approx 2-3 Days

Home Delivery

United Kingdom mainland delivery from £9.95 ex VAT

Parcel Delivery (Highlands & Islands are charged a higher fee than standard)

check delivery cost

updown
£13.89 ex VAT
(£16.67 inc VAT)

CIM-TEK Tank Dryer - Check for water in your tank! Description

CIM-TEK Tank Dryer

Absorbs water out of Fuel, Diesel, Petrol, Bio-Diesel, Fuel Oil. The Cim-Tek Tank dryer is a water filtration device which sits at the bottom of your tank, removing any water. Manufactured from a super-absorbent polymer, the device rests on the base of the tank and is attached to the fill area via the attached cord and clip.


How Tank Dryer works

Simply lower the Tank Dryer through the fill point or inspection chamber of your fuel tank, letting it sink into place at the bottom of the tank and secure using the attached cord. When the Tank Dryer becomes saturated it begins to swell and when fully swollen, the Tank Dryer should be removed and discarded responsibly. It is recommended that each Tank Dryer should be inspected weekly and replaced at least every three months.


Features and Benefits:

  • Absorbs 350ml of water
  • 600mm long, 40mm diameter (when full)
  • Versatile - Fits in most 2' fill points on both steel and plastic storage tanks
  • Highly Absorbent - Reduces the risk of contaminated fuel and 'Bug' formation that can cause vehicle and machine damage
  • Cord attached - Very quick and easy to use
  • As a passive system, the Tank Dryer does not interfere with flow rates, making it ideal for use with tanks connected to fuel delivery systems
  • Ideal for preventative maintenance programmes

Bio Diesel Bugs

Water can enter your tank and contaminate the fuel stored inside. Due to its density, water sinks to the bottom and is a fundamental cause of bacteria growth when in contact with new Bio Diesels. Commonly called 'Bugs in Fuel', if not removed, these 'Bugs' reproduce and create a Bio Film which contaminates the inside of your tank. Their waste produces more water and a sludge that is the main cause of machinery damage and failure, leading to costly downtime and loss of productivity. Using a Tank Dyer can limit the risk, as its clever design means that it attracts water and absorbs it.

CIM-TEK Tank Dryer - Check for water in your tank! Specification

  • Product Code: HY
  • Suitable For Fuel: Petrol, Diesel, Gas Oil, Heating Oil, Bio Fuel

CIM-TEK Tank Dryer - Check for water in your tank! Customer Reviews

By on
"Did as specified on website"
Star Rating 5
By on
"Great product would highly recommend to anyone"
By on
"It works well, tank is now dry, no more boiler cut-outs 80)"
Star Rating 5

CIM-TEK Tank Dryer - Check for water in your tank! Delivery Information

Tanks:

The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page.  Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.

 

Tanks Over 2500L – Articulated Lorry – Customer Offload:

These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift.  Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.

 

18 Tonne Tail Lift HGV

This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery.  If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.

 

HIAB Delivery

HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.

 

Accessories:

Most accessories will be delivered within 1-3 working days. If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.

 

 

CIM-TEK Tank Dryer - Check for water in your tank! Returns Information

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Fuel Tank Shop return policy now.

People who bought this also bought...