Brigon Smoke Filter Papers (Pack of 40)
Product Ref: 2602008
(allow 5 Working days for delivery)
Home Delivery
United Kingdom mainland delivery from £9.95 ex VAT
Parcel Delivery (Highlands & Islands are charged a higher fee than standard)
login to saveBrigon Smoke Filter Papers (Pack of 40) Description
Brigon Smoke Filter Papers (Pack of 40)
The Brigon Smoke Filter Papers are a professional consumable tool intended for combustion analysis, furnace inspections, and boiler service work. This pack includes 40 individual filter paper strips designed to trap or sample soot, smoke, or particulate emissions - helping technicians evaluate combustion quality and detect problems in burner systems, boiler flues, and heating appliances.
Key Features & Benefits
-
High Sensitivity Sampling
The filter papers catch fine soot particles and smoke residues, enabling detailed visual or instrumental assessment of combustion byproducts. -
Consistent Quality (Pack of 40)
Supplied in a bulk pack, so you have enough filters for multiple inspections or for multiple job sites. Eliminates frequent reordering. -
Manufactured to Spec
Made to professional standards by Brigon, so each strip should have consistent characteristics - absorbency, thickness, filtration properties - ensuring repeatable results. -
Compact & Easy to Use
Lightweight and easy to carry in a toolkit. The strips can be positioned in flue gas paths or near combustion chambers, then later removed and evaluated. -
One-Year Warranty
Covered against manufacturing defects, offering peace of mind in terms of reliability.
Typical Applications
-
Combustion Testing & Diagnostics
Use filter papers to sample emissions from boilers, burners, or furnaces. Comparing the collected soot and smoke residue across different operating conditions helps you tune combustion, detect incomplete combustion, or spot fuel/air ratio issues. -
Boiler Servicing & Maintenance
Especially useful during routine maintenance inspections to monitor smoke quality, detect build-up of particulates, or verify if combustion improvements have reduced smoke. -
Emission Compliance & Reporting
In installations subject to smoke or particulate emissions regulation, filter paper sampling provides a simple, cost-effective check of smoke levels. -
Training & Demonstration Use
For teaching combustion theory or demonstrating the effect of tuning, these filters show real, visible evidence of changes in smoke production.
Usage & Handling Tips
-
Placement: Position a filter strip in the flue gas stream (or where smoke is best sampled) while the appliance is running under normal conditions.
-
Exposure Time: Leave in place for a specified interval (per your protocol or standard) before removing.
-
Evaluation: Inspect the collected residue visually (or under magnification) and compare among strips or against smoke standards.
-
Label & Record: Mark each strip (date, time, location, operating conditions) so you can compare results over time.
-
Storage & Care: Keep unused strips in a clean, dry environment (free from dust or contaminant exposure). Handle with clean gloves or tweezers to avoid pre-contamination.
-
Disposal: After analysis, discard used strips following your local waste handling practices (combustion residue may be considered soot/ash).
Brigon Smoke Filter Papers (Pack of 40) Specification
- Product Code: HY
Brigon Smoke Filter Papers (Pack of 40) Delivery Information
Tanks:
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks Over 2500L – Articulated Lorry – Customer Offload:
These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift. Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.
18 Tonne Tail Lift HGV
This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery. If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.
HIAB Delivery
HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.
Accessories:
Most accessories will be delivered within 1-3 working days (certain products and postcodes may take longer, please check the product page for update to date information). If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.
Brigon Smoke Filter Papers (Pack of 40) Returns Information
Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **
All Items must be returned unused, refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).
If you wish to return goods, please complete the form on this page to provide further information.
Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.
Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.
Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.
People who bought this also bought...
