Tigerloop Original De-Aerator - External Fitting
Tigerloop Original De-Aerator - TON110i
The Tiger Loop removes air from heating oil and is fitted on the outside wall of the property, between the tank and the pressure jet burner. This allows the tank to be installed lower than the burner. The Tiger Loop can draw fuel from upto 30m away with a 10mm fuel line. Suitable for oil and kerosene. 1/4" F BSP.
- Tigerloop Wall Bracket
- Cleaner burn saves fuel
- Cleaner burn saves on maintenance
- Cleaner burns saves money
- Cleaner burn saves on breakdowns
- Pre-heating helps burn in cold weather
- Nozzle Capacity (l/h) - 110
- Oil Flow (l/h) - 230
- Max return oil (l/h) - 120
- De-aerating capacity (l/h) - 8
- Max operating temp - 60ºc
- Max/Min Pressure - +0.5/-0.6
- Inlet/Outlet - 1/4" F BSP
- Kerosene and oil
The new and improved original and third generation automatic oil de-aerator pre-heats the oil to at least room temperature by absorbing the heat from the boiler room and friction heat from the pump. Fitting requires three 1/4" BSPF fittings.
The Tigerloop is a product designed to meet increasing demands on energy savings, environmental and operational safety. Environmental regulations and changes in oil qualities continue to place high demands not only on material selection, but also on clean and air-free oil for optimal combustion with minimal discharge of harmful particles. Tigerloop makes it possible to use a one-pipe system in all types of heating installations, thus ensuring the most environmentally safe method for transporting oil from the oil tank to the burner.
Tigerloop combines the advantages for the oil pump of a two-pipe system with advantages from the oil tank of a one-pipe system. When using a one-pipe system and Tigerloop, only the amount of oil used by the oil burner is drawn from the oil tank. As the oil flow decreases, so does the amount of dirt particles transported from the tank. This results in cleaner combustion. The pressurized return line to the oil tank is removed, thus eliminating the risk for hazardous leakage. A large amount of air bubbles are released when oil is drawn from the oil tank to the oil burner. These air bubbles cause breakdowns, increased soot and excessive wear on the oil pump. By functioning as an automatic deaerator, Tigerloop eliminates all such problems.
- Tigerloop Fitting Kit (2x Steel braided lines and fittings) - required for new installation
Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to 4.6 & 4.7. **
Please be aware that returning a tank can be complicated and expensive so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside".
Most accessories will be delivered within 1-3 working days. If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock we will advise you of the expected lead time and you will of course have the opportunity to cancel with a full refund.
People who bought this also bought...
£25.00 ex VAT
(£30.00 inc VAT)
£3.50 ex VAT
(£4.20 inc VAT)
from £30.00 ex VAT
(£36.00 inc VAT)
Was £22.00 Now from £18.75 ex VAT
(£22.50 inc VAT)
Was £22.00 Now £18.75 ex VAT
(£22.50 inc VAT)