Piusi Viscomat Flowmat Gear Oil Transfer Pump

Product Ref: 302000/302040

Currently out of stock with supplier. Due Early February

Home Delivery

United Kingdom mainland delivery from £9.95 ex VAT

Parcel Delivery (Highlands & Islands are charged a higher fee than standard)

check delivery cost

Choose option:

updown

Piusi Viscomat Flowmat Gear Oil Transfer Pump Downloadable Documents

Piusi Viscomat Flowmat Gear Oil Transfer Pump Description

Piusi Viscomat Flowmat Gear Oil Transfer Pump

The Piusi Viscomat Flowmat oil transfer pump with pressure switch combines the typical characteristics of gear pumps with the convenience of an automatic switch-off at the end of delivery. This allows the user to activate the fuel transfer pump without worrying about the need to switch the motor on and off. The performance of this Piusi pump guarantees good flow rates with high pressures, no pulsing, regular flow and silent operation. These oil transfer pumps can be used for both feeding single delivery points (with or without reels), and on fixed distribution systems.

  • Self-priming Viscomat oil transfer pump
  • Aluminium body & sintered steel gears
  • Pressure switch with incorporated safety valve
  • Smooth flow & high suction capacity
  • Incorporated bypass valve & NBR lip seal
  • Flow rate: 9-14ltr per min (depending on model)
  • Viscosity 50-2000 cSt
  • Maximum fluid temperature of 70ºc
  • Continuous running
  • 1” F BSP
  • Protection grade: IP55
  • 230v 50Hz
  • Max flow (lpm) - 9
    Pressure (bar)-(psi) 6-87
  • Max flow (lpm) - 14
  • Pressure (bar)-(psi) 12-174

Please note: Piusi is Italian made and therefore supplied with a 2 pin European plug (Europlug).  You will either need to change the plug for a UK 3 pin plug or utilise an adaptor.

Piusi Viscomat Flowmat Gear Oil Transfer Pump Specification

  • Product Code: CT
  • Suitable For Fuel: Lubricant, Clean Oil

Piusi Viscomat Flowmat Gear Oil Transfer Pump Delivery Information

Tanks:

The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page.  Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.

 

Tanks Over 2500L – Articulated Lorry – Customer Offload:

These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift.  Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.

 

18 Tonne Tail Lift HGV

This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery.  If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.

 

HIAB Delivery

HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.

 

Accessories:

Most accessories will be delivered within 1-3 working days. If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.

 

 

Piusi Viscomat Flowmat Gear Oil Transfer Pump Returns Information

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Fuel Tank Shop return policy now.

People who bought this also bought...