Manual Diesel Nozzle (With latch)

Product Ref: NOZ.S2LA

Home Delivery

United Kingdom mainland delivery from £9.95 ex VAT

Parcel Delivery (Highlands & Islands are charged a higher fee than standard)

check delivery cost

Manual Diesel Nozzle (With latch) Description

Manual Diesel Nozzle (With Latch)

The Hytek Manual Diesel Nozzle (with latch) has been specially designed to provide an economic nozzle for hand pump applications. This robust nozzle has been designed to prevent excess maintenance or replacement costs caused by general wear and tear. The nozzle has a sturdy cast aluminium body that comes equipped with a 1" F BSPP swivel as standard, keeping your hoses and operation safe while filling. The Nozzle also has been manufactured with an integral hook for tidy storage, ideal for easy storage and to prevent accidental damage.

The Manual Diesel Nozzle is suitable for use with diesel and bio-diesels up to B30.

Product Features:

  • Max flow rate: 80lpm (litres per minute)
  • Comes with latch for use with hand pumps only.
  • Nozzle Spout OD: 25mm
  • Suitable for diesel or biodiesel up to B30
  • Cast aluminium body.
  • Integral hook for tidy storage
  • Cranked spout for easy filling.
  • 1" F BSPP Swivel 
  • Suitable for Diesel & Bio Diesel up to B30
  • 2-year warranty

Manual Diesel Nozzle (With latch) Specification

  • Product Code: HY
  • Guarantee: 2 Year Guarantee
  • Suitable For Fuel: Diesel, Bio Fuel

Manual Diesel Nozzle (With latch) Delivery Information


The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page.  Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.


Tanks Over 2500L – Articulated Lorry – Customer Offload:

These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift.  Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.


18 Tonne Tail Lift HGV

This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery.  If a smaller vehicle is required, please email us at quoting your order number and name.


HIAB Delivery

HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at quoting your order number and name, and we will come back to you with a price for this service.



Most accessories will be delivered within 1-3 working days. If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.



Manual Diesel Nozzle (With latch) Returns Information

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Fuel Tank Shop return policy now.

People who bought this also bought...