JAB DUC 2 90L Indirect Slim Unvented Cylinder

Product Ref: JD2090ISLIM

25 Year Guarantee
  • Volume: 90ltr
  • Dimensions: H:900mm
  • Diameter: 470mm
  • (allow 7 Working days for delivery)

    Home Delivery

    United Kingdom mainland delivery from FREE ex VAT

    FREE Delivery to Mainland UK

    check delivery cost

    JAB DUC 2 90L Indirect Slim Unvented Cylinder Downloadable Documents

    JAB DUC 2 90L Indirect Slim Unvented Cylinder Description

    JAB DUC 2 90L Indirect Slim Unvented S/S Cylinder

    The JAB DUC 2 90L Indirect Slim Unvented Stainless Steel Cylinder is a high-performance domestic hot water storage cylinder designed to deliver reliable, mains-pressure hot water to taps, showers, and appliances throughout the home.

    Constructed from high-grade duplex stainless steel for durability and corrosion resistance, the DUC 2 90 provides long service life with minimal maintenance. Its compact 90-Litre capacity makes it ideal for smaller homes, apartments, and en-suite systems, while the unvented design eliminates the need for a cold-water storage tank - freeing up valuable loft space and providing powerful water pressure at every outlet.

    This indirect model is designed to be heated by a gas or oil boiler, with an additional immersion heater connection for backup or off-peak heating.

    Designed with installation in mind, allowing most existing airing cupboards to be used. The ideal choice for the replacement of standard copper cylinders.

     

    Applications

    • Domestic and light commercial properties
    • Properties seeking mains-pressure hot water without loft tanks
    • Homes using a gas or oil boiler for water heating
    • Modernisation or replacement of traditional vented systems
    • En-Suite bathrooms or low-profile hot water installations
    • Ideal for properties with limited space
    • Typical use: 1-Bedroom flats or small apartments with 1 bathroom.

     

    Key Features & Benefits

    • 90-Litre Capacity - 90-litre stainless stel unvented cylinder
    • Indirect coil for boiler connection
    • Factory-Fitted high-performance installation
    • Factory tested to meet G3 Building Regulations
    • High-Pressure Performance- Delivers strong, consistent mains-pressure hot water
    • Compact Design - Space-saving cylinder ideal for cupboards, lofts, or utility rooms
    • Efficient heating - Fast heat recovery from connected boilers
    • Durable Stainless Steel Build - Corrosion-resistant for long service life
    • No Cold-Water Tank Required - Saves loft space and simplifies installation
    • Energy-Efficient - Advanced insulation reduces heat loss and energy costs
    • Compliant and Safe - Supplied with all safety controls and G3 Certification
    • 25-Year Warranty - Including One Year On-Site Warranty
    • U.K. Manufactured

     

    How it works

    1. Colds Mains Supply: The cylinder takes in cold water directly from the mains supply
    2. Primary Heating: The indirect coil inside the cylinder is heated by your central heating boiler, transferring heat to the stored water
    3. Hot Water Storage: The heated water is stored in the stainless-steel vessel, ready for use
    4. Backup Heating: An immersion heater can be used as an alternative or secondary heat source
    5. Mains Pressure Delivery: Hot water is supplied to outlets at mains pressure, ensuring strong flow rates and consistent temperature.

     

    Specifications

    Product Code JD2090ISLIM
    Nominal Capacity (L) 90
    Height (mm) 900
    Diameter Ø (mm) 470
    Reheat From Cold (Minutes) 26
    Reheat from 70% Draw-off (minutes) 18
    ERP Band C
    Immersion Rating (kW) 3
    Standing Heat Loss (kWh/24hrs) 1.37

     

    All indirect units are supplied with:

    • 1 x Dual Stat. And high Limit Stat
    • 1 x 3kW 240v s/p Immersion heater
    • 1 x Expansion Vessel
    • 1 x T & P Relief Valve
    • 1 x 3 bar Inlet Chain
    • 1 x Two Port Motorised Valve

     

    * Please note, the image is for visual purposes only and may be slightly different upon arrival

    JAB DUC 2 90L Indirect Slim Unvented Cylinder Specification

    • Product Code: HWS
    • Guarantee: 25 Year Guarantee

    JAB DUC 2 90L Indirect Slim Unvented Cylinder Delivery Information

    Tanks:

    The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page.  Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.

     

    Tanks Over 2500L – Articulated Lorry – Customer Offload:

    These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift.  Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.

     

    18 Tonne Tail Lift HGV

    This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery.  If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.

     

    HIAB Delivery

    HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.

     

    Accessories:

    Most accessories will be delivered within 1-3 working days (certain products and postcodes may take longer, please check the product page for update to date information). If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.

     

     

    JAB DUC 2 90L Indirect Slim Unvented Cylinder Returns Information

    Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

    All Items must be returned unused, refunds cannot be issued for used or previously installed items.

    Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

    If you wish to return goods, please complete the form on this page to provide further information.

    Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

    Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

    Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

    View Fuel Tank Shop return policy now.

    People who bought this also bought...