Double IBC Spill Pallet without Platform
Product Ref: SJ-545-YE
Estimated Lead Time: 7 to 10 Working Days
Home Delivery
United Kingdom mainland delivery from £290.00 ex VAT
STANDARD Delivery to Mainland UK - Customer to off-load (POstcode exclusions apply to AB. BT, DD, EH, FK, G, GY, HS, IM, IV, JE, KA, KW, KY, ML, PA20+ & PH, PO30+, ZE)
Double IBC Spill Pallet without Platform Safety and Handling Recommendations
- Only store compatible liquids in IBCs placed on the pallet
- Do not exceed the maximum load capacity
- Wear appropriate PPE when handling drums or cleaning spills
- Inspect the container regularly for damage or excessive liquid build-up
- Dispose of collected spill liquids in accordance with local environmental regulations
Double IBC Spill Pallet without Platform Downloadable Documents
Double IBC Spill Pallet without Platform
The Double IBC Platformless Spill Pallet is a heavy-duty spill containment solution designed to safely house 2 Intermediate Bulk Containers (IBCs) while providing reliable protection against leaks, drips and accidental spills.
With an open sump design and no raised platform, this unit offers maximum containment volume and straightforward cleaning access, making it ideal for high-risk liquid storage areas.
Finished in high-visibility yellow, it helps promote safer storage practices while supporting environmental compliance.
UK, manufactured from medium density polyethylene.
Features & Benefits
- Holds 2 IBCs
- Open Spill Sump (no platform)
- Large-Capacity Spill Sump
- Heavy-Duty Construction
- High-Visibility Yellow Finish
- Forklift Friendly (when Empty)
- Low Maintenance Design
Delivered fully assembled, ready for use.
- Number of containers: 2 x IBCs
- Sump capacity: 1238ltr.
- Colour: Yellow.
- Weight: 75kg
- Height: 575 mm
- Width: 2300 mm
- Depth: 1360 mm
In compliance with the Oil Storage Regulations of both England and Scotland, the large sump holds 25% of the total volume stored or 110% of the single largest item (whichever is the greatest).
Delivery
All our Spill Pallets are for delivery by customer offload. This entails the customer to acquire the right manpower and/or machinery to help unload the tank/s from the delivery vehicle.
If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.
Double IBC Spill Pallet without Platform Specification
- Product Code: JO
- Made From: Made in Britain
Double IBC Spill Pallet without Platform Frequently Asked Questions (FAQs)
How many IBCs can this unit hold?
It is designed for Two Standard IBCs
What does 'without platform/platformless' mean?
The IBCs sit directly above the open sump area, increasing containment volume and making clean-out easier.
Does it provide secondary containment?
Yes, the integrated sump captures leaks and spills to prevent ground contamination
Is the container suitable for indoor and outdoor use?
It is suitable for indoor use and sheltered outdoor environments
Can it be moved with a forklift?
Yes, it is designed to be forklift handled when empty
Double IBC Spill Pallet without Platform Delivery Information
Tanks:
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks Over 2500L – Articulated Lorry – Customer Offload:
These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift. Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.
18 Tonne Tail Lift HGV
This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery. If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.
HIAB Delivery
HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.
Accessories:
Most accessories will be delivered within 1-3 working days (certain products and postcodes may take longer, please check the product page for update to date information). If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.
Double IBC Spill Pallet without Platform Returns Information
Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **
All Items must be returned unused, refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).
If you wish to return goods, please complete the form on this page to provide further information.
Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.
Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.
Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

Login












