• display as grid Grid
  • display as list List

Angled Fuel Tank Fill PointAngled Fuel Tank Fill Point
Angled Fuel Tank Fill Point
Angled Fuel Tank Fill Point The angled fuel tank fill point, which comes with a mounting bracket and drip cap, enables the filling of large tanks to be a simple and easy process. As they are installed into the tank, these fill points are commonly purchased by fuel storage tank manufacturers. This 2” female threaded fill point is comprised of a non return valve, a four hole mounting bracket...
£149.00 ex VAT
(£178.80 inc VAT)
Brass Gate Valve
Brass Gate Valve
Brass Gate Valve The Brass Gate Valve is a standard gate valve, which can be used for a variety of applications, including on some of our Gravity Hose Kits. These economy gate valves are designed for starting/shutting off flow, In a range of sizes including 1/2', 3/4', 1”, 1 1/2', 2', 2 1/2', 3', and 4' all with F x F BSP inlets/oultets. The gate valves are used...
from £14.00 ex VAT
(£16.80 inc VAT)

Locking Angle Brass Gate Valve
Locking Angle Brass Gate Valve
Locking Angle Brass Gate Valve The Locking Angle Brass Gate Valve is used primarily on the bottom outlet of a gravity fed diesel storage tank. These gate valves are designed to come out at 90º to take away the pressure on the hose, and to maximize the flow rate through the delivery hose without restriction. The locking lever on these gate valves allows it to be padlocked when not in use. This...

4

£24.00 ex VAT
(£28.80 inc VAT)
Straight Fuel Tank Fill PointStraight Fuel Tank Fill Point
Straight Fuel Tank Fill Point
Straight Fuel Tank Fill Point Fuel tank fill points are designed to allow the easy filling of large static tanks from ground level or from a remote location. These fill points are designed primarily for fuel storage tank manufacturers and custom fabricators, and come complete with mounting brackets and drip caps. Terminating in a 2” male thread, the straight fuel tank fill point is made...

5

£119.00 ex VAT
(£142.80 inc VAT)

Yellow Handle Lever Ball Valve
Yellow Handle Lever Ball Valve
Yellow Handle Lever Ball Valve These Italian manufactured Yellow Handle Lever Ball Valves are nickel-plated full bore brass ball valves and are available in a range of sizes. Designed for starting/shutting off flow, these lever ball valves are popular within gas, water & fuel applications. They have a steel handle, FP o-ring and PTFE seals and are available with a range of pressure ratings depending...
from £12.00 ex VAT
(£14.40 inc VAT)
FAQs
What are the power requirements for mains powered Harlequin Fuel Stations, Harlequin Fuel Points and Harlequin BioFuel Stations?

13 amp single-phase mains power supply with a Residual Current Device (RCD) fitted at the connection point to the power supply. All mains electrical installations must only be undertaken by a qualified electrician and must be inspected and tested regularly in accordance with statutory requirements.

What liquids are Harlequin Fuel Stations and Harlequin Fuel Points suitable for storing and dispensing?

Diesel (D) to British Standard BS2869. Additionally, Harlequin Fuel Stations and Harlequin Fuel Points are also suitable for the storage and dispensing of Bio-Diesel with a bio-element of up to 5% concentration.

Can I store and dispense Kerosene (C1/C2) from a Harlequin Fuel Station, Harlequin Fuel Point or Harlequin BioFuel Station?

No. The pumps and ancillary equipment fitted to these products are suitable only for use with Diesel. Dispensing a non-approved fuel from this equipment could result in serious injury or death.