Piusi Viscomat 90 Vane Electric Oil Transfer Pump

Product Ref: 303M00/303000

IN STOCK - DELIVERY IN 3-5 DAYS

Home Delivery

United Kingdom mainland delivery from £9.95 ex VAT

Parcel Delivery (Highlands & Islands are charged a higher fee than standard)

check delivery cost

Choose option:

updown

Piusi Viscomat 90 Vane Electric Oil Transfer Pump Downloadable Documents

Piusi Viscomat 90 Vane Electric Oil Transfer Pump Description

Piusi Viscomat 90 Vane Electric Oil Transfer Pump

The Piusi Viscomat 90 Vane oil transfer pump is an ideal solution for the transfer of large amounts of oil at medium pressure from one tank to another. This Piusi pump also maintains good flow rates when used in high pressure systems, where the oil pump supplies hose reels for fixed oil dispensing. These electric oil transfer pumps are reliable and high quality pumps, which have a high suction, smooth flow and operate at less than 70dB.

  • Self-priming Viscomat oil transfer pump
  • Smooth flow & high suction capacity
  • Sintered steel rotor & acetal resin vanes
  • Incorporated bypass valve & Viton lip seal
  • Flow rate: 50ltr per min
  • Viscosity up to 500 cSt
  • Maximum fluid temperature of 70ºc
  • Continuous running
  • 1” F BSP inlet/outlet
  • Protection Grade: IP55
  • Available in 230v/400v

Piusi Viscomat 90 Vane Electric Oil Transfer Pump Specification

  • Product Code: CT
  • Suitable For Fuel: Lubricant, Clean Oil

Piusi Viscomat 90 Vane Electric Oil Transfer Pump Customer Reviews

By on
"Prompt service and delivery."
Star Rating 5

Piusi Viscomat 90 Vane Electric Oil Transfer Pump Delivery Information

Tanks:

The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page.  Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.

 

Tanks Over 2500L – Articulated Lorry – Customer Offload:

These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift.  Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.

 

18 Tonne Tail Lift HGV

This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery.  If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.

 

HIAB Delivery

HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.

 

Accessories:

Most accessories will be delivered within 1-3 working days. If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.

 

 

Piusi Viscomat 90 Vane Electric Oil Transfer Pump Returns Information

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Fuel Tank Shop return policy now.

People who bought this also bought...