Oil Tank Sight Gauge - Atkinson Tankmaster
Product Ref: TM4790
Approx 3-5 Days
Home Delivery
United Kingdom mainland delivery from £9.95 ex VAT
Parcel Delivery (Highlands & Islands are charged at a higher fee than standard)
login to saveOil Tank Sight Gauge - Atkinson Tankmaster Downloadable Documents
Tankmaster Data SheetOil Tank Sight Gauge - Atkinson Tankmaster Description
Oil Tank Sight Gauge - Atkinson Tankmaster Valve 4-in-1 Sight Gauge
Basic visual sight gauge for single skin oil tanks with an integral oil filter, shut off valve & fire valve. Choice of sight gauge sizes to suit most tanks (4ft 6" to 10ft).
Manual 4-in-1 level gauge for single skin tanks:
1 - Control valve to turn on/off oil supply
2 - Pull to read valve/sight tube allows inspection of tank contents level
3 - Integral filter to ensure only clean oil is allowed to pass from the tank
4 - Self-closing hand wheel isolates oil supply in case of fire near the tank;
Atkinson Tankmaster Features
- PVC Sight Gauge
- Pull-To-Read valve to isolate flow into tube during rest
- On/Off Handwheel
- Eutectic Solder Fire valve built into handwheel
- 10mm Brass Compression fitting outlet
- 52 Micron Nylon Filter (Replaceable)
- Reversible body for left or right-hand exit of compression fitting
- Stand-off Clip for mounting top of tube to top of tank
- 1/2" BSP Male Tank Fitting (if fitting to a 1" outlet, you will need an extension piece - see below)
- Mounting kit, for top of sight tube
- Full instructions
Tankmaster Adaptor (Extension Pieces)
- Required for fitting to 1" BSP outlets (as Tankmaster body is 1/2")
- Required for plastic tanks (when fitting to a plastic tank, the outlet will be recessed - you will require an extension fitting to ensure the Atkinson Tankmaster Valve does not foul the end of the tank and prevent installation)
- Available in 1", 3 1/2", 6 1/4" and 7 1/4" (1" BSP Male Tank fitting/lock-nut at one end and 1/2" BSP Female at the other end - select your required length from the options)
Tip: Sight Gauges should not be fitted to bunded tanks; however, they may be used on any single skinned tank or in any area that is protected by a bund.
Oil Tank Sight Gauge - Atkinson Tankmaster Specification
- Product Code: ATK
Oil Tank Sight Gauge - Atkinson Tankmaster Customer Reviews
Oil Tank Sight Gauge - Atkinson Tankmaster Delivery Information
Tanks:
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks Over 2500L – Articulated Lorry – Customer Offload:
These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift. Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.
18 Tonne Tail Lift HGV
This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery. If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.
HIAB Delivery
HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.
Accessories:
Most accessories will be delivered within 1-3 working days. If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.
Oil Tank Sight Gauge - Atkinson Tankmaster Returns Information
Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **
All Items must be returned unused, refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).
If you wish to return goods, please complete the form on this page to provide further information.
Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.
Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.
Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.
View Related Categories
You may also like...
People who bought this also bought...
£80.00 ex VAT
(£96.00 inc VAT)
