Manual Diesel Nozzle (No Latch)

Product Ref: NOZ.S2A

Out of Stock until July

Home Delivery

United Kingdom mainland delivery from £9.95 ex VAT

Parcel Delivery (Highlands & Islands are charged a higher fee than standard)

check delivery cost


Manual Diesel Nozzle (No Latch) Description

Manual Diesel Nozzle (No Latch)

The Hytek engineered manual nozzle has been designed to be a cost-effective and affordable option to other leading brands, without sacrificing features and usability. This nozzle has been carefully designed with a cast aluminium body to increase its robustness and to prevent wear and tear, making it a useful nozzle in even the most demanding of environments. These manual nozzles can be used with both gravity dispensing systems and pumping systems. The nozzles are designed to make filling as easy as possible, with a cranked spout and a max flow rate of 80 litres per minute. Also, this nozzle comes equipped with a storage hook as standard, which decreases the cost associated with wear and tear, and the risks associated with incorrect storage.

The latch less nozzle also helps to decrease the environmental risk factors when filling. By removing manual operation error, this can reduce the risk of spillages from overfilling vehicles or plant machinery.

Product Features:

  • Supplied with a 1" female BSPP swivel.
  • Suitable for Diesel/ Biodiesel up to B30.
  • Max pressure 80lpm. (litres per minutes)
  • Cast aluminium body.
  • Suitable for gravity and pumped dispensing.
  • Integral hook for tidy storage when not in use.
  • Cranked Spout for easy use.

Manual Diesel Nozzle (No Latch) Specification

  • Product Code: HY
  • Guarantee: 2 Year Guarantee
  • Suitable For Fuel: Diesel, Bio Fuel

Manual Diesel Nozzle (No Latch) Delivery Information


The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page.  Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.


Tanks Over 2500L – Articulated Lorry – Customer Offload:

These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift.  Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.


18 Tonne Tail Lift HGV

This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery.  If a smaller vehicle is required, please email us at quoting your order number and name.


HIAB Delivery

HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at quoting your order number and name, and we will come back to you with a price for this service.



Most accessories will be delivered within 1-3 working days (certain products and postcodes may take longer, please check the product page for update to date information). If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.



Manual Diesel Nozzle (No Latch) Returns Information

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Fuel Tank Shop return policy now.

People who bought this also bought...