Gledhill Es 120 Litre Indirect Unvented Cylinder
Product Ref: SESINPIN120
Home Delivery
United Kingdom mainland delivery from FREE ex VAT
FREE Standard Cylinder Delivery - Postcode exclusions apply to AB, IV, PH, PA, KW, HS, KA, KY, DD, BT, TR, PO30, GY, JE, IM
login to saveGledhill Es 120 Litre Indirect Unvented Cylinder Description
Gledhill Es 120 Litre Indirect Unvented Cylinder
Gledhill's proven technology and quality manufacturing ensures this cylinder provides mains pressure hot water, allowing high flow rates for showers and baths, with no requirement for a boost pump.
The unvented cylinder is built from highly corrosion-resistant duplex stainless steel and is supplied with full NSF WRC and WRAS independent approvals.
Features:
- Supplied with External expansion Vessel, Immersion heater & Control Valve Pack
- Cylinder heated by a boiler indirectly plus immersion heater
- Delivers mains pressure hot water, enabling high flow rates for showers and baths without the need for a boost pump
- 40mm insulation to reduce heat loss
- Insulation thickness is 40mm
- Recycled materials used in construction
- Cylinder is supplied with plain pipe connections suitable for use with compression fittings
- 3 bar Pre-charged Expansion Vessel size: 12 Litres
- Pressure Regulator 3 bar inlet group c/w balance cold supply
- Expansion vessel connection and expansion valve set at 4.5 bar
- Maximum working pressure : 3 bar
- Opening temperature of P & T Relief Valve 95 degree C
- Energy cut-out thermostat setting 82 degree C
- Manufactured in accordance with the requirements of BS EN 12897
- Supplied with full NSF WRC and WRAS independent approvals
- The unvented cylinder is manufactured from highly corrosion-resistant duplex stainless steel
- Supplied with a 25 year guarantee from the manufacturer
Gledhill Es 120 Litre Indirect Unvented Cylinder Specification
- Product Code: PF
- Delivery Options: Fast Delivery
- Guarantee: 25 Year Guarantee
Gledhill Es 120 Litre Indirect Unvented Cylinder Delivery Information
Tanks:
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks Over 2500L – Articulated Lorry – Customer Offload:
These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift. Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.
18 Tonne Tail Lift HGV
This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery. If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.
HIAB Delivery
HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.
Accessories:
Most accessories will be delivered within 1-3 working days (certain products and postcodes may take longer, please check the product page for update to date information). If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.
Gledhill Es 120 Litre Indirect Unvented Cylinder Returns Information
Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **
All Items must be returned unused, refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).
If you wish to return goods, please complete the form on this page to provide further information.
Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.
Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.
Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.
People who bought this also bought...
