Cim-Tek High Capacity Water & Particle Fuel Filter 120lpm - 10 Micron

Product Ref: HYD.PKITH10

Lead time approx. 2 - 3 working days

Home Delivery

United Kingdom mainland delivery from £9.95 ex VAT

Parcel Delivery (Highlands & Islands are charged a higher fee than standard)

check delivery cost

updown
You may also need:
Cim-Tek Hyrdrosorb Filter 70098 - 120 LPM
Cim-Tek Hyrdrosorb Filter 70098 - 120 LPM
£60.00 ex VAT
(£72.00 inc VAT)

Cim-Tek High Capacity Water & Particle Fuel Filter 120lpm - 10 Micron Downloadable Documents

Cim-Tek High Capacity Water & Particle Fuel Filter 120lpm - 10 Micron Description

Cim-Tek High Capacity Water & Particle Fuel Filter 120lpm - 10 Micron

This Cim-Tek Hydrosorb Fuel Tank Filter is an industry recognised filter designed to remove water and debris up to 10 micron. The Cim-Tek fuel storage filters have a spin on resin coated pleated paper canister element, which allows for the easy removal and replacement of the diesel filter element once it becomes full. 

The Cim-Tek 70098 is suitable for pumping installations up to 120lpm.

Cim-Tek hydrosorb fuel filter includes two parts, static filter adaptor (head) and element. All Cim-Tek filter components, including the replacement 70098 element, are available individually as replacements.

Specification:

  • 1" opening that is required for newer model service stations require 
  • 10 micron Cim Tek filter
  • Maximum flow rate of 120 litres Per Min
  • Suitable for diesel
  • Includes 1 x filter element and 1 x 400 series filter head

Cim-Tek High Capacity Water & Particle Fuel Filter 120lpm - 10 Micron Specification

  • Product Code: HY
  • Filtration: 10 Micron Particulate
  • Suitable For Fuel: Diesel

Cim-Tek High Capacity Water & Particle Fuel Filter 120lpm - 10 Micron Delivery Information

Tanks:

The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page.  Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.

 

Tanks Over 2500L – Articulated Lorry – Customer Offload:

These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift.  Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.

 

18 Tonne Tail Lift HGV

This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery.  If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.

 

HIAB Delivery

HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.

 

Accessories:

Most accessories will be delivered within 1-3 working days. If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.

 

 

Cim-Tek High Capacity Water & Particle Fuel Filter 120lpm - 10 Micron Returns Information

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Fuel Tank Shop return policy now.

You may also like...

People who bought this also bought...