Bottom Outlet Kit - 3 Way

Product Ref: AFV-1003

Home Delivery

United Kingdom mainland delivery from £7.00 ex VAT

Parcel Delivery (Highlands & Islands are charged at a higher fee than standard)

check delivery cost

updown
You may also need:
Replacement Filter for Bottom Outlet Kit
Replacement Filter for Bottom Outlet Kit
£9.50 ex VAT
(£11.40 inc VAT)

Bottom Outlet Kit - 3 Way Description

Bottom Outlet Kit with 3 Outlets (Tank Fitting Kit)

Bottom outlet fitting kit to allow 3 separate oil connections or the flexibility to connect at a right angle to the tank.

Supplied complete with:

  • Isolation Valve
  • 52 Micron Nylon Filter Element
  • 1" BSP Male Tank-Fitting Adaptor
  • Back nut (to lock the filter in the correct orientation once the adaptor has been tightened)
  • 3 x 3/8" BSP Female Outlets
    • one either side of the body (exiting at right angles to the tank one to the left and one to the right) and one at the front
    • all outlets can be utilised, or it can give you the flexibility of choosing which angle the oil pipe exits and blank off the other 2 (3/8" BSP blanking plugs supplied)
  • 1 x 3/8" BSP Male to 10mm Compression Fitting (extras can be sourced if you require all 3 outlets)
  • 2 x Blanking Plugs

Bottom Outlet Kit - 3 Way Specification

  • Product Code: ATK

Bottom Outlet Kit - 3 Way Customer Reviews

By on
"for excellent service received"
Star Rating 5
By on
"Great service and parts, exactly what was required."
Star Rating 5
By on
"just the job problem fixed"
Star Rating 5
By on
"Excellent product,can not fault. Good delivery."
Star Rating 5
By on
"A+"
Star Rating 4

Bottom Outlet Kit - 3 Way Delivery Information

Tanks:

The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page.  Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.

 

Tanks Over 2500L – Articulated Lorry – Customer Offload:

These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift.  Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.

 

18 Tonne Tail Lift HGV

This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery.  If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.

 

HIAB Delivery

HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.

 

Accessories:

Most accessories will be delivered within 1-3 working days. If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.

 

 

Bottom Outlet Kit - 3 Way Returns Information

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Fuel Tank Shop return policy now.

You may also like...

People who bought this also bought...