
5000LPVFDA Low Profile Bunded Diesel Dispenser
Product Overview
The Atlas 5000LPVFDA is a 5,000 litre low-profile bunded diesel dispensing tank designed to provide secure on-site fuel storage and convenient vehicle and equipment refuelling.
With a nominal capacity of 5,000 litres, approximately 1,000 gallons, the tank combines a bunded storage vessel with an integrated dispensing system. It is suitable for diesel and HVO storage and provides a practical fuel storage and dispensing solution for farms, construction sites, commercial fleets, agricultural businesses, workshops and other sites where fuel is regularly dispensed on sit
Key Features
- 5,000 litre nominal storage capacity
- Approximately 1,000 gallon capacity
- Bunded tank-within-a-tank construction
- Vertical tank design
- Integrated diesel dispensing system
- Suitable for diesel and HVO
- 6 metre delivery hose supplied as standard configuration
- Automatic shut-off nozzle
- 10 micron water and particulate filter
- Overfill prevention valve
- Clock-type contents gauge
- 12V or 240V pump options
- Mechanical flow meter option
- 8 metre hose reel and flow meter option
- Suitable for on-site vehicle and equipment refuelling
- 10-year tank-only guarantee
- 280kg empty tank weight
Delivery
Please note it is the customer responsibility to arrange suitable offloading equipment unless a hiab has been requested at a additional cost.
We recommend not to book any installation or machinery until the tank has been delivered. We will not be responsible for any additional cost occurred with delayed deliveries.
Failed deliveries may result in additional charges.
Collection may be available ex works (Please contact us in regards to this option).
Specifications
| Product Ref | AT |
|---|---|
| Volume (litres) | 5,000 |
| Diameter (mm) | 2,460 |
| Height (mm) | 1,964 |
| Weight (kg) | 280 |
| Footprint (L+W) | 2460mm + 2460mm |
| Lead time (working days) | 14 |
Delivery Terms
Estimated Leadtime is 10 to 14 Working Days
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside", which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks over 2,500L — articulated lorry, customer offload
These tanks are delivered on an articulated vehicle (approximately 16.5m long × 2.6m wide × 3m high) which has no offloading on board. It is the customer's responsibility to offload the tank, which may require a telehandler or forklift.
Curtain-sided vehicles are also used, so please note that if there are obstacles or overhanging branches on the road to the delivery site, the driver may refuse to drive to the location due to the risk of damaging the vehicle. Please let us know about any obstructions before delivery so we can arrange alternative transport.
18-tonne tail-lift HGV
This vehicle is roughly the size of the largest bin lorries — approximately 8.2m long × 2.6m wide × 4m high, and often curtain-sided. If there are overhanging branches, these vehicles will not attempt the route, so a smaller vehicle should be requested.
Tanks are lowered to the ground but not positioned, as this is a kerbside delivery. If a smaller vehicle is required, email sales@fueltankshop.co.uk quoting your order number and name.
HIAB delivery
HIAB delivery is available but must be requested, and carries an additional cost. Email sales@fueltankshop.co.uk quoting your order number and name, and we'll come back to you with a price.
Accessories
Most accessories are delivered within 1–3 working days. Certain products and postcodes may take longer — check the product page for current information. If you need them sooner we can sometimes offer a next-day service; please contact us to discuss. If an item is out of stock we'll advise the expected lead time, and you're free to cancel for a full refund.
Returns Information
Customers may return items within 14 calendar days, as set out in section 7 of our Terms & Conditions.
All items must be returned unused. Refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so do check you're ordering the correct item — we strongly suggest checking the dimensions carefully before you buy.
How to return an item
- Complete the form on our returns page with details of your order.
- Once your request is approved, we'll issue a Returns Authorisation Number (RAN) along with instructions on how and where to return your order, and any costs involved.
- Please do not return any goods without this authorisation. Goods cannot be accepted without a valid RAN.
- Returns are not accepted at our Minehead office. Please wait until we contact you before returning anything.
Downloadable Documents
What is a bunded tank?
Tank Compliance
Delivery Information
Talk to a specialist.
Sizing, regulations, installation. Our team has been answering these questions since 2011.
- Choosing a selection results in a full page refresh.
- Opens in a new window.
