2 Inch BSP Inlet Fill Point for Oil Tank

Product Ref: PTF3000

Approx 3-5 Days

Home Delivery

United Kingdom mainland delivery from £7.00 ex VAT

Parcel Delivery (Highlands & Islands are charged at a higher fee than standard)

check delivery cost

2 Inch BSP Inlet Fill Point for Oil Tank Description

2" BSP threaded Tank Inlet/Fill Point

This is suitable for use with all plastic tanks that can be accessed from the inside through a 'hatch'.

This requires a 2" hole to be cut in the top of the tank and the unit passed up through from the inside and the locking nut to be attached from the outside to hold this in place.

Comes completes with 'O' Ring; Locking Nut; Polypropylene Cap with Chain.

2 Inch BSP Inlet Fill Point for Oil Tank Specification

  • Product Code: ATK

2 Inch BSP Inlet Fill Point for Oil Tank Customer Reviews

By on
"First class service . From ordering to receiving it"
Star Rating 5
By on
"Fittings lacked a suitable sealing washes , o' ring suppied inadequate"
Star Rating 3
By on
"Very good quality materials and well made."
Star Rating 5
By on
"Nozzle was exactly what I needed. Easy to fit."
Star Rating 5
By on
"Cost a big issue see comments above"
Star Rating 2
By on
"Easy to fit - exactly the right size"
Star Rating 5
By on
"Does the job, perfect replacement for old fitting."
Star Rating 5
By on
"very good and helpfull"
Star Rating 5
By on
"very good and help full no problems"
Star Rating 5
By on
"Helpful and efficient"
Star Rating 5
By on
"First class service and product!"
Star Rating 5
By on
"Just good all round service and fitted first time"
Star Rating 5
By on
"It the first time I have used this service and it was just excellent"
Star Rating 5
By on
"The technical service and advice given was brilliant."
Star Rating 5

2 Inch BSP Inlet Fill Point for Oil Tank Delivery Information

Tanks:

The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page.  Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.

 

Tanks Over 2500L – Articulated Lorry – Customer Offload:

These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift.  Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.

 

18 Tonne Tail Lift HGV

This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery.  If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.

 

HIAB Delivery

HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.

 

Accessories:

Most accessories will be delivered within 1-3 working days. If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.

 

 

2 Inch BSP Inlet Fill Point for Oil Tank Returns Information

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Fuel Tank Shop return policy now.

You may also like...

People who bought this also bought...