1350 Litre Bunded Steel Oil Tank

Product Ref: 1350FB

Supplied complete with Clock Type Contents Gauge & Bottom Outlet Fitting Kit

1 Year Guarantee Steel Diesel, Gas Oil, Heating Oil Diesel, Gas Oil, Heating Oil Diesel, Gas Oil, Heating Oil Slimline Bunded
  • Volume: 1350ltr
  • Weight: 220.000kg
  • Dimensions: L:2000mm W:660mm H:1300mm
  • Lead Time approx 3 - 4 Weeks

    Home Delivery

    United Kingdom mainland delivery from FREE ex VAT

    FREE STANDARD Delivery for selected STEEL TANKS - TAIL LIFT Delivery (available for most tanks under 2500 litres) - Lowers tank to ground level to assist in off-loading (Additional charges may be applicable to Scotland, Highlands and Islands & N Ireland)

    check delivery cost


    1350 Litre Bunded Steel Oil Tank What is a bunded tank?

    A bunded tank consists of a 'tank within a tank'.

    The inner tank is the primary storage vessel, whilst the outer tank acts as a failsafe.

    In the event of a spill, surplus fuel will safely and securely be stored within the outer tank and an environmental pollution incident will be averted. 

    1350 Litre Bunded Steel Oil Tank Description

    1350 Litre Steel Bunded Oil Tank

    Quality made budget tank.

    1350 litre (approx. 297 gallons) bunded kerosene storage tank.

    This bunded steel oil tank is ideal for the storage of home heating oil.

    Tank Specification:

    • Bunded Steel Tank (2mm)

    • 2" Fill Point (inc. Cap)

    • 2" Vent (inc. Cap)

    • 1" BSP Bottom Outlet (complete with Bottom Outlet Fitting Kit)

    • Clock Contents Gauge

    • Undercoated in red oxide and top coated in gloss green paint

    Optional Extras:

    • Channel Runners - raising tank off the ground to keep tank base dry (not included in quoted height dimension)

    • Lifting Eye

    Compliant with:

    • Oil Pollution Prevention Guidelines (England & Wales) 2002 PPG2

    1350 Litre Bunded Steel Oil Tank Specification

    • Product Code: HH
    • Delivery Options: Tail Lift Delivery
    • Guarantee: 1 Year Guarantee
    • Made From: Steel
    • Suitable For Fuel: Diesel, Gas Oil, Heating Oil
    • Tank Shape: Slimline
    • Tank Type: Bunded

    1350 Litre Bunded Steel Oil Tank Customer Reviews

    By on
    "I am extremely pleased with the quality of the tank, what I was not pleased with was the time it took to get here. I understand that the tank supplier had staffing problems, I on the other hand had to wait a week without hot water until your tank arrived. Great tank, poor delivery time."
    Star Rating 4

    1350 Litre Bunded Steel Oil Tank Installation requirements

    This Oil Tank must be installed and maintained in accordance to the current OFTEC guidelines, by an OFTEC Registered Technician or similarly competent person.

    Fuel Tank Shop and the manufacturer will not be responsible for oil tank installations which do not comply with these requirements.

    OFTEC Base Construction Guidelines (in brief):

    • Adequate for the weight of the tank when full
    • Non-combustible, imperforate and level
    • Constructed of concrete, paving stones or stonework
    • Large enough to extend 300mm beyond ALL sides of the tanks

    1350 Litre Bunded Steel Oil Tank Delivery Information


    The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page.  Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.


    Tanks Over 2500L – Articulated Lorry – Customer Offload:

    These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift.  Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.


    18 Tonne Tail Lift HGV

    This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery.  If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.


    HIAB Delivery

    HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.



    Most accessories will be delivered within 1-3 working days (certain products and postcodes may take longer, please check the product page for update to date information). If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.



    1350 Litre Bunded Steel Oil Tank Returns Information

    Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

    All Items must be returned unused, refunds cannot be issued for used or previously installed items.

    Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

    If you wish to return goods, please complete the form on this page to provide further information.

    Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

    Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

    Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

    View Fuel Tank Shop return policy now.

    You may also like...

    More from this collection...