1125 Litre 3000psi Pressure Washer Site Bowser

Product Ref: 1125Litre3000psiSiteTowPR

Water
  • Volume: 1125ltr
  • Dimensions: L:3479mm H:1447mm
  • Custom Delivery Required

    Delivery price on application.

    updown

    1125 Litre 3000psi Pressure Washer Site Bowser Description

    1125 Litre 3000psi Pressure Washer Site Bowser

    Constructed from a robust fully welded chassis the 1125 litre water bowser is a very capable machine on building sites etc.  With a 3000 psi diesel electric start jet washer.

    Site water bowsers and containers provide portable solutions where no mains water connections are available and are ideal for use in car wash facilities, fields and construction sites.

    • Towing Height - (Level) 460mm
    • Unladen Weight - 370 Kg
    • Laden Max - 1460 Kg

    CHASSIS:

    • Constructed from 100 x 50 RSC fully welded, with front standing plate and an ‘A’ frame drawbar, 80x80x6 RSA frame, hot dipped galvanised.

    AXLE:

    • Single 45mm solid square beam axle fitted with heavy-duty taper rolled bearing hub.

    WHEELS AND TYRES:

    • 2 No. 175 x 13 x 8ply tyres on 4 stud 5.1/2” pcd rims.

    COUPLING:

    • 2” solid forged ring eye.

    TANK:

    • Polyethylene moulded tank elliptical in section, baffled & fitted with a 22” lockable outer hinged manlid cover, inner sealed vented manlid. Tank secured to chassis with 2 stainless steel straps.1 rear tap fitted, 2” bottom drain underneath rear of tank. 2 rear outlets.

    ANCILLARY EQUIPMENT:

    • T27 Adjustable Screw Leg

    PUMP:

    • Yanmar electric start L100 10HP engine driving a 200 Bar (3000 psi), 15Lpm piston pump c/w hand lance & 9m of hose stowed on bracket. Fuel consumption approx 1.5L/Hr, running time approx 2.9Hrs

     

    1125 Litre 3000psi Pressure Washer Site Bowser Specification

    • Product Code: TE
    • Suitable For Fuel: Water

    1125 Litre 3000psi Pressure Washer Site Bowser Delivery Information

    Tanks:

    The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page.  Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.

     

    Tanks Over 2500L – Articulated Lorry – Customer Offload:

    These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift.  Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.

     

    18 Tonne Tail Lift HGV

    This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery.  If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.

     

    HIAB Delivery

    HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.

     

    Accessories:

    Most accessories will be delivered within 1-3 working days. If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.

     

     

    1125 Litre 3000psi Pressure Washer Site Bowser Returns Information

    Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

    All Items must be returned unused, refunds cannot be issued for used or previously installed items.

    Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

    If you wish to return goods, please complete the form on this page to provide further information.

    Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

    Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

    Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

    View Fuel Tank Shop return policy now.